| Description |
| Sensor type |
3-cup anemometer |
| |
|
| Applications |
wind resource assessment |
| meteorological studies |
| environmental monitoring |
| |
|
| Sensor range |
1 m/s to 96 m/s (2.2 mph to 214 mph) (highest recorded) |
| |
|
| Instrument compatibility |
controllers or loggers requiring a square wave signal |
| |
|
| Output signal |
| Signal type |
square wave signal from open collector transistor |
| external pull-up resistor required |
| frequency proportional to wind speed |
| |
|
| Transfer function |
m/s = (Hz x 0.765) + 0.35 |
| [miles per hour = (Hz x 1.711) + 0.78] |
| |
|
| Accuracy |
within 0.1 m/s (0.2 mph) for the range 5 m/s to 25 m/s (11 mph to 55 mph) |
| |
|
| Recommended load resistance |
output sinks up to 20 mA |
| 3300 Ohm typical pull-up resistor for 24V |
| 250 Ohm minimum pull-up resistor for 5V |
| |
|
| Calibration |
calibrated version available |
| |
|
| Output signal range |
0 Hz to 125 Hz (highest recorded) |
| |
|
| Response characteristics |
| Threshold |
0.78 m/s (1.75 miles per hour) |
| |
|
| Distance constant (63% recovery) |
3.0 m (10 feet) |
| |
|
| Moment of inertia |
68 x 10-6 S-ft2 |
| |
|
| Swept diameter of rotor |
190 mm (7.5 inches) |
| |
|
| Power requirements |
| Supply voltage |
5 V to 24 V DC |
| |
|
| Supply current |
9 mA max. |
| |
|
| Installation |
| Mounting |
onto a 13 mm (0.5 inch) diameter mast with cotter pin and set screw |
| |
|
| Tools required |
0.25 inch nut driver, petroleum jelly, electrical tape |
| |
|
| Environmental |
| Operating temperature range |
-55 °C to 60 °C (-67 °F to 150 °F) |
| |
|
| Operating humidity range |
0 to 100% RH |
| |
|
| Physical |
| Connections |
4-40 brass hex nut/post terminals |
| |
|
| Weight |
0.14 kg (0.3 pounds) |
| |
|
| Dimensions |
3 cups of conical cross-section, 51 mm (2 inches) dia. |
| 81 mm (3.2 inches) overall assembly height |
| |
|
| Materials |
| Cups |
one piece injection-molded black polycarbonate |
| |
|
| Body |
housing is black ABS plastic |
| |
|
| Shaft |
beryllium copper, fully hardened |
| |
|
| Bearing |
modified Teflon, self-lubricating |
| |
|
| Boot |
protective PVC sensor terminal boot included |
| |
|
| Terminals |
brass |